How can you fix an air mattress without a patch kit?

If you are looking to have an air mattress as your next bed, you might have also wondered whether you can fix your air mattress yourself in case of any puncture, which will also provide you with some kind of assurance before buying the product. But are you asking yourself if it’s possible to fix an air mattress without a patch kit?

The most effective way to fix a hole in an air mattress without the help of a patch kit and if you don’t have any adhesive by your side, just use duct tape. Simply cut a large enough piece to cover the puncture and also around it and then apply it against the degreased surface. Another useful option is using hot glue and applying that to the punctured area in order to make sure all the leaks are concealed.

In order to even save your mattress from getting punctured, just to be on the safer side keep all sharp things away from your bed and also be aware of pets and table corners. When you collapse your mattress don’t force the air out and neither overinflate as it may damage your air mattress.

What is an air mattress?

An air mattress is an inflatable mattress made up of polyvinyl chloride, rubber, or textile-reinforced urethane plastic. They are inflated when used, and after their usage, they can be deflated and stored in a small place by folding them.

An air mattress is a great option for everyday use if one is looking for a cost-effective way to customize firmness, or if you need the flexibility in moving your bed during the day.

How to fix an air mattress without a patch kit?

Air mattresses are an affordable and space-saver alternative instead of a regular bed. However, even the best of the best air mattresses are not immune to accidental tears and punctures.  One can easily fix these problems, and you might not even need the patch kit your air mattress comes with. It can even be fixed with duct tape, super glue, or even nail polish.

Methods

• Locating the leak: First, inflate the mattress up to its full capacity and seal the valve as anyone generally does. Then find the puncture in your air mattress by hearing the air leakage sound. There are also alternative ways like spraying a mixture of dish soap and water and locating the foam bubbles. 
• Deflate the mattress completely: Any air left inside may prevent the patch or glue whatever one uses from forming a tight seal, and the puncture will require to be repaired again. 
• Scrub it: If the puncture is on any flocked top part of the air mattress, you need to scrub the part so that the patch can adhere properly.
• Making a patch kit: the easiest way is to glue a patch to the leaking area. you can use any thin plastic or rubber material for making a patch, for example, a piece of a shower curtain, a pool liner, or a piece of an inner bike tire. Then cut the needed amount of material, Degrease the surface, apply glue according to the instructions, and then hold it for a few minutes. 
• Using superglue: Superglue is helpful when it is used in order to patch a small and thin puncture with two edges that need to adhere together. You can either use superglue as an adhesive for the previous method or just squeeze the glue above the puncture without any patches. One can use stitching motions to apply glue to the leaks or punctures. Use the process at least two times.  Then inflate the air mattress and check it.
• Get nail polish: Few preparations are required in this method as a UV light source is required to trigger the polymerization reaction in the nail polish but it’s pretty effective. Firstly, sand the area around the hole, then degrease the area by rubbing alcohol or nail polish remover, then need to apply a drop of nail polish above the hole or puncture, then turn on the UV light and needs to set it above the nail polish for 15 seconds in order for it to cure. Repeat the process if needed.
• Marine goop glue: Marine goop glue is a waterproof and UV-resistant glue that can also be used as a sealant. Firstly sand the surface and degrease it, then apply a thin layer of goop glue above the leak, then allow the sealant to cure. Note one must let the sealant dry for at least 24 hours. 
• Use a hot glue gun: Locate the hole in your mattress and mark it, then place the glue stick into the glue gun and turn it on which will allow it to heat up, squeeze the trigger of the gun, and dab a small bob over the puncture area or the hole which will seal it completely, then allow the glue to cool down and then check the quality of the seal by inflating the air mattress. 
• Patch a hole with Duct tape: If one needs to fix a hole in an air mattress without a patch kit and one does not have any adhesive then one can use duct tape. Cut a large enough piece of duct tape in order to cover the puncture and some space around it in order to apply it to the degreased surface. 

Is an air mattress waterproof?

Yes, air mattresses can be waterproof which are perfect for both home and camping use. The air mattresses which are made of lightweight polyester laminate and are puncture resistant are generally waterproof. Waterproof air mattresses are generally having a solid surface. Some of them also feature a built-in pump for easy use. 

What is an air mattress patch kit?

A patch kit or repair kit is a set of items and tools used to repair or fix an air mattress, it commonly comprises both tools and spares.

When are they used? 

 An air mattress is used by pressurized air and it might get punctured under various unfortunate circumstances, therefore it requires a patch kit in order to fix it. 

Are they suitable for an air mattress?

Yes, a patch kit is suitable for an air mattress, and luckily, repairing an air mattress with a patch kit is an easy process.

Patch kits are:

• Lightweight
• Portable
• Easy to use
• Affordable

They are lightweight and portable which means that they can be moved and stored easily, even by one person. 

Different ways to use a patch kit:

Any thin plastic material can be used as a patch. when someone is making their own patch they must make sure that it is big enough so that it completely covers the leak area and actually overlaps it to ensure air tightness. one can use super glue, contact or rubber cement, or even epoxy as your adhesive. 

• Use a patch kit that came with the mattress.
• Purchase a bike tire patch kit and use it on your air mattress as it will be more than sufficient.
• One can make their own patch from a shower or a pool liner.
• One can use any thin plastic material as a patch.
• Use hot glue to fill in a punctured area along the seam. 
• And duct tape can be used as a fast and temporary measure.

Last word: 

Therefore, now we know that it is possible to fix an air mattress without a patch kit in various ways and can be also protected from getting punctured or damaged under uncertain conditions by taking precautionary measures.